Disinfectant Sensors

Self-Cleaning Membraneless Digital Disinfectant Sensor YG-CC

YG-CCFormer model: YG-CL20/DC

詳細仕様は英語で表示されます。

The self-cleaning membraneless digital disinfectant sensor is a three-electrode potentiostatic amperometric sensor developed by YuanGan with proprietary intellectual property. It measures disinfectant concentrations such as free chlorine, chlorine dioxide (high-purity) and ozone. An ARM processor and efficient filtering algorithm built into the electrode effectively suppress noise, and the RS-485 interface makes it easy to connect to computers and network monitoring systems.

Typical applications

Water Treatment Plants
Secondary Water Supply
Swimming Pools
Water Transmission Network

見積依頼 WhatsApp

yan@yuangankeji.com · +86-400-1688-667 · WhatsApp +86 151 7883 0466

Key features

01
Electrochemical sensor
No reagent consumption or pollutant discharge
02
Membraneless design
No membrane cap replacement or electrolyte refilling
03
Three-electrode design
Stable zero point and high sensitivity
04
Built-in high-precision sampling circuit
Gives the sensor good linearity
05
Comparison with DPD
Correlates accurately with the DPD method when pH changes little
06
Self-cleaning design
Stable electrode operation and longer maintenance interval

Technical Specifications

System parameters
Measured parameters:	Free chlorine, chlorine dioxide (high-purity), ozone, temperature
Operating voltage:	DC 9–28 V
Peak power:	0.5 W
Communication interface:	RS485, 4–20 mA
Electrode material:	Single platinum wire, stainless steel, silver chloride
Sample flow velocity:	>700 mL/min, and the flow rate must be kept stable
Operating temperature:	-5–45 °C (non-freezing)
Operating pressure:	<0.1MPa
Mounting:	RBMS
Disinfectant
Measurement method:	Reagent-free electrochemical three-electrode amperometric system
Range:	0–5 / 20 mg/L
Resolution:	0.001 mg/L
Limit of detection:	0.030 mg/L or lower
Accuracy:	±3% (DPD correlation error ±10% or +0.05mg/Lwhichever is greater)
Repeatability:	±3%
Response time (T90):	≤90 s
Calibration method:	One- or two-point calibration
Sample pH range:	4–9
Temperature
Measurement method:	Thermistor method
Range:	-5°C~60°C
Resolution:	0.1°C
Accuracy:	±0.4°C
Repeatability:	0.2°C
Response time (T90):	≤25 s
Calibration method:	One-point calibration
(Note: specifications may change with product improvements; YuanGan reserves the right to modify them.)